Simix Training Center | How to Clean Floors | How to Coat Air Conditioners | How to Protect Surfaces from Viruses
  • Home
  • Pre-Strip
  • Stripping
    • Stripping an Older Floor
    • Stripping a New Floor
  • Coat
    • Transition Epoxy Terrazzo
    • Soft Stone Application
  • Recoat
  • Daily Maintenance
    • Cleaning Hard Tile and Grout with a Mop
    • Cómo trapear pisos con Simix e IPC Dual Bucket Mop System
  • Concrete
    • Refresh Industrial Concrete
    • Polish Industrial Concrete
    • Standard Polished Concrete
    • Maintain Polished Concrete
    • Refresh Polished Concrete
    • Stained Concrete
    • Concrete Considerations
    • Outdoor Concrete
  • Roof
    • How to Clean & Coat White Membrane Roofs
    • How to Clean & Coat Asphalt Shingles
    • How to Clean & Coat a Barrel Tile Roof
  • A/C
    • Commercial A/C
    • Home Air Conditioners
  • Kitchen Cleaning
    • Clean Windows
    • Clean & Coat Stainless Steel
  • Pavers
  • Buy Now
  • Contact
  • SDS

HOW TO APPLY
​SIMIX MULTI-SURFACE CERAMIC COATING
​TO CARS, RVS, BOATS AND AIRPLANES

Applying Simix Multi-Surface Ceramic Coating to cars, boats and RVs is simple.

But, you need to make sure you follow our steps exactly.


EXTERIOR and INTERIOR

Prep Product
  1. Shake gallon well. Product must be diluted 1:1 with water. For easier handling, pour desired amount into clean, new smaller container, then add water.
  2. Shake mixture well.

Prep Surface
  1. Thoroughly clean and remove any visible surface contaminants.
  2. Clay bar if needed.
  3. Do any needed paint correction.

Apply
  1. Only work small areas at a time. Dampen microfiber cloth or foam applicator sponge with water.
  2. Apply product onto the surface with a vertical and horizontal motion.
  3. Dry buff immediately with second microfiber cloth in similar manner until product is completely absorbed.
Print out instructions
GLASS AND MIRRORS

Prep Product
  1. Dilution rate is 4 parts water to 1 part coating.
  2. Pour water into clean, new spray bottle first.
  3. Add coating and shake.

Prep Surface
  1. Thoroughly clean surface.​

Apply
  1. Only work small areas at a time. Dampen microfiber cloth or foam applicator sponge with water. Spray mixture to dampened cloth or sponge.
  2. Apply product onto the surface with a vertical and horizontal motion.
  3. Dry buff immediately with second microfiber cloth in similar manner until product is completely absorbed.

Note: You can spray directly onto surface. 
Any overspray must also be dry buffed.
SIMIX USA
About Us
Contact Us
  • Home
  • Pre-Strip
  • Stripping
    • Stripping an Older Floor
    • Stripping a New Floor
  • Coat
    • Transition Epoxy Terrazzo
    • Soft Stone Application
  • Recoat
  • Daily Maintenance
    • Cleaning Hard Tile and Grout with a Mop
    • Cómo trapear pisos con Simix e IPC Dual Bucket Mop System
  • Concrete
    • Refresh Industrial Concrete
    • Polish Industrial Concrete
    • Standard Polished Concrete
    • Maintain Polished Concrete
    • Refresh Polished Concrete
    • Stained Concrete
    • Concrete Considerations
    • Outdoor Concrete
  • Roof
    • How to Clean & Coat White Membrane Roofs
    • How to Clean & Coat Asphalt Shingles
    • How to Clean & Coat a Barrel Tile Roof
  • A/C
    • Commercial A/C
    • Home Air Conditioners
  • Kitchen Cleaning
    • Clean Windows
    • Clean & Coat Stainless Steel
  • Pavers
  • Buy Now
  • Contact
  • SDS